|
This is the Futaba Mode 2 Airplane Version T10CAG Transmitter and R6014HS 14-ch Receiver with the 2.4GHz FASST system. This version is Mode 2-Left Hand Throttle and Right Hand Elevator.
*** This Transmitter and Receiver are CE Marked ***
*** This receiver is new high speed version with better heat resistent. ***
Contains software for airplanes, helicopters and gliders.
This is the airplane version which will default to airplane settings,
with mode 2 stick operation when powered up and has a ratcheted throttle stick.
This transmitter contains firmware's language: English, Deutsch, French, Espanol, Italiano, Cestina and Nederlands. For users in France, this 2.4Ghz transmitter could be set to France Mode. For other user, it could be set to General Mode.
The 10CG: pro-level features at a sport-system price.
The 10CG is perfect for the price-conscious pilot — an integrated, 2.4GHz treasure trove of features formerly found only on the most advanced Futaba systems.
But it’s also a system that boasts advantages few others can claim: 7-point throttle and pitch curves; 4 heli flight modes; a round dozen factory-defined glider mixes; graphics for programming swash plate types; swash ring; and logic switches that allow you to activate a timer or other function just by changing the positions of specific sticks or switches.
10CG System Overview:
•Dial ‘n Key™ programming w/joystick
•Airplane, heli and glider software
•2048 resolution
•Real-Time Response™
•Smart Switch Technology™
•Basic & advanced menus
•15-model memory, expandable to 48 models*
•10-character model & user naming
•Assignable switches & dials/functions
•Model select, copy, re-set
•Data transfer
•2 proportional slider switches
•Fail-safe, sub-trims, servo reversing & EPA
•Digital trims & trim step, expo & dual/triple rates
•160 x 72 backlit LCD w/adjustable contrast
•Servo monitor display
•Auxiliary channel screen for 1-step function/switch assignment
•Model & system timers
•Full functionality trainer system (cord required)
•Throttle cut, hold & idle down
•Mode 1-4 selectable
•Sticks w/length and tension adjustments
* Requires optional 128K CAMPac Module (FUTM9408)
Airplane Features
•8 programmable mixes
•Elevator/Flap
•Throttle needle
•Aileron differential
•Flaperons
•V-tail
•Elevon
•Air brake w/elevator delay
•Ailevator
•4-position snap roll switch
•2 independent gyro settings
•7-point throttle curve
•Flap trim
Heli Features
•6 programmable mixes
•Hover/pitch
•Hover throttle
•8 swash plate types w/graphics
•Swash AFR
•5-point revo mixing
•Gyro menu
•7-point throttle & pitch curves w/delay
•High/low pitch setting
•Swash ring
•Throttle hold & 3 idle-ups w/delay
Glider Features
•8 programmable mixes
•Butterfly/elevator (2)
•Elevator/flap
•Chamber mix
•Aileron/flap
•Aileron/rudder
•Flaperons
•V-tail
•4-point offset
•Spoiler mix
•Single/dual flap servos
•5 flight conditions
•3 wing types
•Adjustable motor cut
R6014HS is a new version 2.4Ghz Receiver from Futaba. It could be operated in Normal Mode or High Speed mode. The Normal Mode accepts any type of servos or the peripherals as the frame rate of the output is 14ms. The High Speed Mode accept the digital servos for outputs from 1ch to 6 ch, including BLS Series, and most peripheral equipments such as the gyro or brushless ESCs. The frame rate of the outputs is 7ms.
The 10CG 2.4GHz is the perfect system for the value-oriented pilot: offering far more than you’d expect for less than you’d imagine.
INCLUDES:
Futaba 10CAG 2.4Ghz Transmitter
NT8S 700B 9.6VDC 700mAh NiCd Transmitter Battery
NR4RB 4.8VDC 1000mAh NiCd Receiver Battery
NiCd battery Charger Model FBC-18C (4) 230V
R6014HS Receiver
Heavy-Duty Switch Harness
R60014HS Spec
2.4Ghz SS
Dual antenna diversity
Power requirement: 4.8V or 6.0 V battery or regulated output from ESC
Dimensions: 52.3 X 37.5 X 16.0 mm
Weight: 20.8 g
|
